UI2000A Digital Electronic Ballast Analyzer is used to test and analyse performance of HID lamp electronic ballast. It is added the new functions of start rush current analysis, current waveform phase analysis and the difference of the lamp current in every successive half-cycle analysis etc.
Features:
- To set and control the process by PC and generate test report automatically.
- Input and output parameters tested simultaneously within 1 second.
- Interface RS-232C provided for easier communication with PC, for printing test report.
- According to the electronic ballasts in international standards of IEC60929, IEC60969, IEC61000-3-2,GB/T15144-94, GB/T17263-2002
Input characteristics:
- Voltage, Current, Power, PF, Hz, Phasicangle.
- THD (Total Harmonic Distortion) of current and voltage, 0-50th harmonic and harmonic spectrum diagram.
- The actual waveform of current and voltage and the current waveform phase analysis.
- Input voltage: 10~300V Input current: 40mA~10A
- Accuracy: ±(0.4% reading+0.1% range +1 digit)
Output characteristics:
- Steady state measurement: voltage, current, power, crest factor, oscillatory frequency
- Input voltage: 10~300V Input current: 0.3~10A
- High frequency range: 20~70kHz
- Low frequency range: 45~500Hz
- Accuracy: ±(1% reading+1% range+2 digit)
Startup parameters measurement:
- The changing curve and data of input voltage, current, power, output lamp voltage, lamp current and lamp power from 0~10 minutes
